Vacuum Planetary Mixing Defoamer

TEL:18925129293

SIENOX Vacuum Stirring Defoaming Machine SIE‑MIX60


Standard Vacuum Defoaming Module · Planetary Agitation Combined with Vacuum Negative Pressure for Deep Removal of Nano‑scale Bubbles

300mL Laboratory Capacity + Standard Vacuum Configuration + 3000rpm Stepless Speed Adjustment

SIENOX SIE‑MIX60 is a 300mL planetary stirring defoaming machine with standard ‑98kPa vacuum module, designed for laboratory R&D scenarios requiring vacuum‑assisted defoaming. Built upon the MIX60 planetary stirring and defoaming capability with integrated vacuum system, agitation and vacuum defoaming run synchronously. Nano‑scale microbubbles hard to eliminate by centrifugal force can be removed in one‑time processing. 

✓ CE Certification  ✓ ISO9001 Quality Management System ✓ RoHS Compliance ✓ Support Custom Voltage (110V/220V)

在线留言 免费寄样测试 工程师热线:189-2512-9293

Why Must Microbubbles in Materials Be Eliminated?

Residual micro‑bubbles in materials directly affect finished‑product yield and performance

Adhesive R&D and Production

Micro‑bubbles in epoxy structural adhesives reduce bonding strength and impair accuracy of mechanical performance test data. Bubbles in sealants trigger sealing failure after curing and leakage during pressure resistance tests. In adhesive R&D, bubble‑induced test deviations may cause misjudgment in formula screening and extend R&D cycles.

Precision Electronic Assembly

Micro‑bubbles in chip underfill adhesives form voids after reflow soldering and degrade device reliability. Bubbles in conductive adhesives break conductive paths and cause electronic component failure. Bubbles in dispensing adhesives result in inconsistent glue volume, undermining assembly precision and product uniformity.

Biosensor Manufacturing

Bubbles in biosensor encapsulation glue destabilize sensor signal transmission and trigger fluctuating test data. Bubbles in reagent immobilization materials cause uneven distribution of bioactive substances and weaken sensor response consistency. Bubbles in microfluidic chip bonding glue lead to channel blockage or leakage and impair detection accuracy.

✨ Dilemma of Traditional Methods: Conventional planetary stirring‑defoaming machines remove bubbles by centrifugal force, yet deliver limited performance on nano‑scale microbubbles and deep‑seated bubbles within high‑viscosity materials. The vacuum stirring‑defoaming solution applies ‑98kPa negative vacuum pressure alongside planetary agitation, lowering pressure difference inside and outside bubbles to expand and release microbubbles, achieving deep defoaming results unavailable with ordinary stirring.

Why Choose SIE‑MIX60?

Three Core Advantages Tailored for Laboratory Vacuum Defoaming R&D Scenarios

In‑depth Vacuum Defoaming

MIX60ZK comes with a standard ‑98kPa vacuum system for immediate vacuum defoaming without extra options. On top of removing large bubbles via centrifugal force from planetary stirring, vacuum negative pressure further eliminates nano‑scale microbubbles and deep‑seated bubbles that centrifugal force hardly removes. Combined with 3000rpm high‑speed rotation, stirring and defoaming run simultaneously to realize in‑depth defoaming in one cycle, ideal for material R&D with strict bubble‑rate requirements.

Precision Small‑batch Sample Processing

The 300mL capacity fits regular laboratory R&D consumption to meet sample preparation needs while avoiding material waste. Dual‑cup design enables simultaneous processing of two groups of samples for comparison tests and process verification. 100‑recipe storage saves parameters such as vacuum level, rotation speed and time with one click. Different vacuum defoaming processes for various materials can be quickly recalled to ensure repeatable experimental data.

Reproducible Process Parameters

Touch‑screen operation allows precise adjustment of vacuum level, rotation speed, time and other parameters for consistent processing conditions. Optional MES network uploads processing data automatically to satisfy R&D traceability requirements. Full‑process visibility and reproducibility from vacuum‑defoaming parameter setup to data logging suit R&D projects demanding strict process management.


✨ Integrating in-depth vacuum defoaming, precision sample processing and reproducible process parameters, MIX60 serves as an ideal device for vacuum-assisted defoaming in laboratory R&D.

Working Principle

Synchronized dual power of revolution and rotation, combined with vacuum negative pressure, achieves in-depth defoaming.

Step 1: Centrifugal Force from Revolution

The rotating revolution plate drives the container and materials to generate strong centrifugal force, triggering full convection of materials for macro mixing. Meanwhile, centrifugal force pushes low-density bubbles toward the rotation axis, gathering and releasing large bubbles.

Step 2: Shear Force from Rotation

The container rotates around its own axis to produce directional shear force, breaking up agglomerated particles for micro dispersion. High speed up to 3000rpm creates powerful shear for efficient full-volume mixing, thinning bubble membranes and accelerating bubble rupture.

Step 3: Vacuum Negative Pressure Boosts Defoaming

While revolution and rotation proceed, the vacuum system reduces chamber pressure to -98kPa. Under low pressure, pressure difference inside and outside bubbles expands nano-sized microbubbles and speeds up their floating and release. Vacuum defoaming compensates the limitation of centrifugal force on tiny bubbles, achieving full-range defoaming from large bubbles down to nanoscale bubbles.


Revolution, rotation and vacuum work simultaneously. Materials complete the full process of "Mixing → Dispersion → Deep Defoaming" inside the sealed container. 3000rpm high speed combined with -98kPa vacuum balances mixing efficiency and defoaming depth.

Vacuum Mixing Defoaming Machine Working Principle.jpg

Quick Technical Specifications

Complete Technical Specifications Overview, Customizable on Demand

ModelSIE‑MIX60
Mixing Capacity0–300 mL (standard container) * Larger volume customizable
Container TypeTest tube / jar / cup; adapters for syringes & cartridges supported
Container Quantity1 or 2 jars (user‑selectable)
Max Speed0 – 3000 RPM (stepless adjustable)
Revolution / Rotation RatioFixed planetary ratio
Vacuum LevelStandard: –98 kPa / Optional: –100 kPa
Control SystemTouch screen, stores up to 100 recipe sets
Power Supply220V, 50/60Hz (110V US/JP standard customizable)
Overall Dimensions(W×D×H)510 × 430 × 500 mm
Net WeightApprox. 95 kg
Certifications CE, ISO9001, RoHS Compliance

我们的合作伙伴

深受全球知名工业制造集群及前沿高校实验室信赖

合作伙伴展示

FAQ 您关心的问题

为您解答关于产品性能及日常工艺选型中的常见疑问

  • 真空脱泡搅拌机是什么?用于哪些行业?

    真空脱泡搅拌机是在真空环境下同步完成搅拌与脱泡的设备,脱泡同时混料,避免二次气泡混入,常用于环氧树脂、硅胶、AB 胶等高粘度材料的混料脱泡处理,广泛应用于新能源电池、半导体封装、LED、电子灌封、胶粘剂等行业。

  • 广州施诺斯主要生产哪些设备?

    主要产品包括搅拌脱泡机、真空脱泡搅拌机、真空脱泡机、高压脱泡机、真空搅拌机、实验室均质机、三辊研磨机、三维混粉机,以及点胶机、分装机等配套设备和夹具、搅拌罐、针筒等辅品耗材。

  • 源头厂家采购脱泡设备有什么优势?

    源头厂家直供可省去中间环节,价格更透明,同时能提供参数定制、来料试机、工艺验证等服务,售后响应更直接。

  • 搅拌脱泡机的工作原理?

    施诺斯设备采用行星式混合原理:料罐在自转的同时绕公转轴公转,物料在罐内随之翻动混合,同时抽真空脱泡。整个过程设备不设搅拌桨,搅拌部件不接触物料,不会引入金属异物,混合均匀不分层。

  • 为什么选择施诺斯?

    施诺斯(SIENOX)是广州施诺斯科技股份有限公司旗下品牌,2014 年成立,专注脱泡机与搅拌机的研发与制造,团队自 2006 年起从事真空搅拌脱泡设备研发。设备采用非接触式设计,不设搅拌桨,行星式公转加自转运动辅以真空系统,高效除泡,混合均匀不分层。公司产品涵盖搅拌脱泡机、真空脱泡搅拌机、真空脱泡机、高压脱泡机、真空搅拌机、实验室均质机、三辊研磨机、三维混粉机,以及点胶机、分装机等配套设备和夹具、搅拌罐、针筒等辅品耗材,广泛应用于新能源、半导体、LED、电子灌封、胶粘剂、涂料、油墨等行业。通过 ISO9001、CE 认证,拥有 30 余项专利,服务富士康、比亚迪、清华大学等企业与科研院所。

Technical Specification List

Full‑line standardized specifications for accurate process evaluation and equipment selection

ModelSIE‑MIX60SIE‑MIXF301SIE‑MIX90
Mixing Capacity0–300 mL (standard container) * Customizable0–300 mL (standard container) * Customizable0–1000 mL (standard container) * Customizable
Container TypeTest tube / jar / cup; adapters for syringes & cartridges supportedTest tube / jar / cup; adapters for syringes & cartridges supportedTest tube / jar / cup; adapters for syringes & cartridges supported
Container Quantity1  or 2 jars (user‑selectable)1  or 2 jars (user‑selectable)1  or 2 jars (user‑selectable)
Max Speed0 – 3000 RPM (stepless adjustable)0 – 2000 RPM (stepless adjustable)0 – 2000 RPM (stepless adjustable)
Revolution / Rotation RatioFixed planetary ratioFreely adjustableFixed planetary ratio
Vacuum LevelStandard: –98 kPa / Optional: –100 kPaStandard: –98 kPa / Optional: –100 kPaStandard: –98 kPa / Optional: –100 kPa
Control SystemTouch screen, stores up to 100 recipe setsTouch screen, stores up to 100 recipe setsTouch screen, stores up to 100 recipe sets
Power Supply220V, 50/60Hz (110V US/JP standard customizable)220V, 50/60Hz (110V US/JP standard customizable)220V, 50/60Hz (110V US/JP standard customizable)
Overall Dimensions(W×D×H)510 × 430 × 500 mm510 × 430 × 500 mm610 × 560 × 780 mm
Net Weight95 kg115kg153 kg
CertificationsCECECE

*** The above are typical models only. Sinos provides customized solutions according to customer requirements. For model selection inquiry: 189‑2512‑9293


Multi‑Industry Solutions

Covering stirring and debubbling applications of typical materials across six major industries

Adhesives.jpg

Adhesive R&D

Epoxy structural adhesives, sealants, hot‑melt adhesives, pressure‑sensitive adhesives, modified adhesives

Precision Optics.jpg

Precision Electronic Assembly

Underfill adhesives, conductive adhesives, die attach adhesives, dispensing adhesives, chip bonding adhesives

Electronic Materials.jpg

Biosensors

Encapsulation glue, reagent immobilization materials, microfluidic bonding glue, biocompatible glue, sensor sealing glue

Thermal Conductive Silicone.jpg

Microelectronic Packaging

Packaging epoxy adhesives, molding compounds, lead bonding adhesives, substrate bonding adhesives, passivation layer materials

Medical Devices02.jpg

Functional Coatings

Hydrophobic coatings, conductive coatings, insulating coatings, anti‑corrosion coatings, wear‑resistant coatings

Photosensitive Materials.jpg

Electronic Pastes

Silver paste, copper paste, carbon paste, resistor paste, dielectric paste

Comprehensive Equipment Operation Demo Videos

Gain intuitive, clear, dynamic insight into synchronous defoaming with planetary centrifugal force and high negative pressure.

Measured Defoaming‑Process Performance

Measured Processing Results for Six Typical Materials

Lubricant Mixing and Defoaming.jpg

Paste‑like Materials

Photoresist Mixing and Defoaming.jpg

Adhesive with Powder

Polymer Materials.jpg

Polymer Materials

Gel Defoaming 02.jpg

Pharmaceutical Gels

Silver Paste Powder Mixing and Defoaming.jpg

Silver Paste Materials

Battery Slurry & Adhesive Mixing and Defoaming.jpg

Battery Slurries



Measured Data Comparison

Defoaming Effect Comparison of Three Representative Materials

Material Type
Status Before Treatment    After MIX60 Treatment         
Silver Paste
 Plenty of visible bubbles on paste surface, uneven silver powder distribution with obvious agglomeration and sedimentation
Smooth and dense paste surface, evenly‑dispersed silver powder without agglomeration, good fluidity and stable conductivity
Battery Cathode Slurry
Massive internal bubbles, poor fluidity, stripes and pinholes appear during coating
Uniform and smooth slurry without residual bubbles, flat coating surface with consistent coating thickness       
Epoxy Adhesive (AB Glue)
Dense micro‑bubbles inside mixed adhesive with milky turbidity, uneven surface after curing   Transparent and clear adhesive without visible bubbles, smooth surface after curing, dense cross‑section free of voids          

* Internal laboratory test data. Actual improvement varies with material formulations. Contact sales for real‑world customer cases.

   

Customer Delivery & Application Cases

Rooted in manufacturing frontlines, empowering benchmark production lines and key national research institutions across diverse industries.


粉末材料.jpg

Stirring & Defoaming Solution for Powders and Fluids


AB Structural Adhesive Mixing & Defoaming Solution.jpg

AB Structural Adhesive Mixing & Defoaming Solution


SIENOX Planetary Defoaming Machine: Tackle Industry Challenges of Ink Mixing and Deaeration.jpg

High-Viscosity Colloid & Phosphor Material Mixing and Defoaming Solution

返回顶部